Warrior Ritual G4 Junior Goalie Leg Pads
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.Warrior has been a force in junior goalie leg pads since the beginning of the Ritual line. By maximizing performance with their light weight, as well as making getting dressed a simple process considering the elastic toe as well as velcro straps there was nothing not to like about the Warrior junior pads. Warrior continues to create interest with their new pad in the line, the Ritual G4 junior goalie leg pad.
The G4 junior goalie leg pads have the same individual knee pad that provides great value to goalies who are going to grow and will still need knee protection moving on into another pad. By having the knee pad fit individually, rather than attached to the pad the Warrior knee pad accommodates this very well.
The Warrior G4 junior goalie leg pads also keep the Active Response Straps that have made life a lot easier for little goalies that can't tie knots as well as they need to. The elastic straps go through the goalies skate allow for a much more secure quick attach system when compared to traditional laces.
The Warrior G4 jr goalie pads also feature a softer boot break when compared to its bigger brothers. This difference in stiffness is to allow younger goalies to manipulate the pad and be able to more properly move in and out of the butterfly.
The G4 junior goalie leg pads have maintained the great features that made it popular with little and big goalies alike.
| Warrior G4 Junior Leg Pad Sizing Chart | ||
|---|---|---|
| Leg Pad Size | Floor-to-Knee Measurement | |
| 24” | 14.75" - 15.75" | 37.6 cm - 40.2 cm |
| 26” | 15.75" - 16.75" | 40.2 cm - 42.7 cm |
| 28” | 16.75" - 17.75" | 42.7 cm - 45.3 cm |
Goalie Leg Pad Sizing
Sizing up your goalie leg pads is crucial for having total control while moving in the crease. There are two different measurements you can use to project the size of leg pad you should be wearing. The first one is your floor-to-knee measurement, which you can match up with our provided sizing charts to find the size of pad you would wear, before plus sizing. The second is the sum of your skate size, mid-ankle-to-mid-knee measurement, and your mid-knee-to-mid-thigh measurement. This measurement gives you a rough idea of what overall size pad you should purchase.
Sizing before Purchase
For measuring your floor-to-knee:
- 1. In your bare feet, place the beginning of your soft measuring tape at the inside of the bottom of your foot.
2. Slightly bend your knee.
3. Run the soft measuring tape up your shin, to the middle of your knee.
4. Match your floor-to-knee measurement with our provided sizing charts.
Skate size + mid-ankle-to-mid-knee + mid-knee-to-mid-thigh
- 1. Take your skate size (for example, size 10).
2. Start your soft measuring tape at the inside of your mid-ankle, and run it up to your mid-knee (for example, 18 inches).
3. Now, from your mid-knee, run your soft measuring tape to your mid-thigh (for example, 7 inches).
4. Add your measurements together (10 + 18 + 7 = 35 inches).
5. This means you should be looking into a 35” pad, give or take.
It should be noted that these measurements line you up for an accurate fit, and not a fit that is intended for growing room. Also, different brands size differently, meaning a 35” pad in one can be a 34” or 36” in another.
Sizing after Purchase
Once you have your new leg pads, you’ll need to make sure they fit you properly. To do so, you’ll need to put the pads on with your skates, as if you are about to go on the ice. There a couple things to do to check size, once you have the pads on:
- 1. Stand straight, bring your feet together. This will show you the overall height of the pad, while on. Your pads should not, in any case, surpass your hips. Realistically, you want the top of your pad coming up to half-way point of your thighs. A pad fitted for growing room will be a little taller, so a little above the half-way point is normal. In any case, your preferences can alter these suggestions.
2. Secondly, go in your stance, keep your hands in a ready position, and drop to your butterfly. Without moving your legs to correct your butterfly, bring your heels together. This is where you assess your knee position. For a perfect fit, you want the middle of your knee to sit directly on the centre of the knee stack. If you’re looking for growing room, you want the middle of your knee to land roughly 1.5” below the centre of the knee stack—1” for junior.
Additional Information
Not getting a complete seal while in your butterfly?
- If you are having trouble getting a full seal in your new pads, it may be the way you’re strapping them up. If this is the case for you, make sure your boot strap and top (above knee) straps are loosened up a bit. The reason you want these straps loose is because they have a direct effect on the rotation of the pad. Therefore, having a loose boot strap makes it easy for your foot and ankle to rotate as the pad moves; same goes for the top straps, as you do not want them pulling down too hard on the thigh rise.
| Warrior G4 Junior Leg Pad Sizing Chart | ||
|---|---|---|
| Leg Pad Size | Floor-to-Knee Measurement | |
| 24” | 14.75" - 15.75" | 37.6 cm - 40.2 cm |
| 26” | 15.75" - 16.75" | 40.2 cm - 42.7 cm |
| 28” | 16.75" - 17.75" | 42.7 cm - 45.3 cm |
Goalie Leg Pad Sizing
Sizing up your goalie leg pads is crucial for having total control while moving in the crease. There are two different measurements you can use to project the size of leg pad you should be wearing. The first one is your floor-to-knee measurement, which you can match up with our provided sizing charts to find the size of pad you would wear, before plus sizing. The second is the sum of your skate size, mid-ankle-to-mid-knee measurement, and your mid-knee-to-mid-thigh measurement. This measurement gives you a rough idea of what overall size pad you should purchase.
Sizing before Purchase
For measuring your floor-to-knee:
- 1. In your bare feet, place the beginning of your soft measuring tape at the inside of the bottom of your foot.
2. Slightly bend your knee.
3. Run the soft measuring tape up your shin, to the middle of your knee.
4. Match your floor-to-knee measurement with our provided sizing charts.
Skate size + mid-ankle-to-mid-knee + mid-knee-to-mid-thigh
- 1. Take your skate size (for example, size 10).
2. Start your soft measuring tape at the inside of your mid-ankle, and run it up to your mid-knee (for example, 18 inches).
3. Now, from your mid-knee, run your soft measuring tape to your mid-thigh (for example, 7 inches).
4. Add your measurements together (10 + 18 + 7 = 35 inches).
5. This means you should be looking into a 35” pad, give or take.
It should be noted that these measurements line you up for an accurate fit, and not a fit that is intended for growing room. Also, different brands size differently, meaning a 35” pad in one can be a 34” or 36” in another.
Sizing after Purchase
Once you have your new leg pads, you’ll need to make sure they fit you properly. To do so, you’ll need to put the pads on with your skates, as if you are about to go on the ice. There a couple things to do to check size, once you have the pads on:
- 1. Stand straight, bring your feet together. This will show you the overall height of the pad, while on. Your pads should not, in any case, surpass your hips. Realistically, you want the top of your pad coming up to half-way point of your thighs. A pad fitted for growing room will be a little taller, so a little above the half-way point is normal. In any case, your preferences can alter these suggestions.
2. Secondly, go in your stance, keep your hands in a ready position, and drop to your butterfly. Without moving your legs to correct your butterfly, bring your heels together. This is where you assess your knee position. For a perfect fit, you want the middle of your knee to sit directly on the centre of the knee stack. If you’re looking for growing room, you want the middle of your knee to land roughly 1.5” below the centre of the knee stack—1” for junior.
Additional Information
Not getting a complete seal while in your butterfly?
- If you are having trouble getting a full seal in your new pads, it may be the way you’re strapping them up. If this is the case for you, make sure your boot strap and top (above knee) straps are loosened up a bit. The reason you want these straps loose is because they have a direct effect on the rotation of the pad. Therefore, having a loose boot strap makes it easy for your foot and ankle to rotate as the pad moves; same goes for the top straps, as you do not want them pulling down too hard on the thigh rise.
