Warrior Alpha Surge Senior Goalie Leg Pads
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.Intro & New Features
New for 2026 are the Alpha Surge Senior Goalie Leg Pads, and Warrior has not disappointed. A completely reinvisioned line, the Surge Leg Pads feature an all-new print on graphic, an updated HyperComp construction, a re-designed 90° boot, and most notably, the new AVS (Advanced Fastening System), a revolutionary technology that takes performance to the next level.
External Material
While the use of JenPro is nothing out of the ordinary – the use of it in place of nylon in areas such as the outer gusset adds to the durability and longevity of the pad for continued use. The Surge leg pad breaks away from its predecessor, opting to do away with the textured pattern previously seen in the G7 for a clean, print-on design instead.
Internal Construction
Warrior has updated their internal construction for the 2026 season. By adding a dual layer of HyperComp to the thigh rise, and by taking advantage of a “sandwich style” overlay system, the Surge has achieved a stiffer overall pad that will keep its shape over time. The HyperComp material itself has been revamped as well, fortifying the ultra-stiff build Warrior was looking to achieve with the Surge. Additionally, the calf has been reinforced in comparison to past years, with spacing effectively reduced to none to enhance the connection between the goaltender and the ice.
Pad Break
The Alpha Surge leg pads utilize a single break design, with a flat face and a traditional Z-shaped bend, helping to seal the 5 hole.
Boot Angle & Toe Taper
Reimagining the philosophy of traditional boot angles, the Surge uses a 90° boot with a mid-stiff flex profile. Warrior’s idea with changing the angle to be at 90° comes down to how the puck rebounds after a shot – while other boot angles may kick a rebound backdoors, the angle of the Surge boot kicks out to the front to allow the goalie to make a save without having to reposition.
Knee Cradle
For better control, the pads use a combination of a completely updated leg channel system and a traditional-to-Warrior shape. The semi-built-in knee block returns from previous Ritual models, which is stiffer for more stability when landing and sliding. The knee cradle on the Alpha Surge is adjustable.
Leg Channel
While the leg channel may appear simple at a first glance, this was done intentionally. Warrior has pruned any unnecessary weight or materials that were not positively affecting performance. Paying strong attention to the knee, non-essential parts were scrapped in favour of a memory foam-adjacent pad also found in top-of-the-line knee pads. In addition to updates in the knee, an adjustable upper calf strap helping to deliver control can be found alongside another noteworthy innovation – a “hammock” style design has been used in place of a calf pillow integration. With six adjustable positions, goalies can create a fit that is truly personalized to them.
Knee & Thigh Protection
Using the same cushiony materials making up the X5 RTL knee pads, the knee stack in the Surge is designed to provide the ultimate level of comfort and protection. Strapping One of the largest innovations in the Surge leg pad is the Advanced Fastening System (AFS). Warrior has inserted HyperComp brackets onto the knee stack and calf plate, creating a more secure fit by creating a stronger seal to the ice and improving stability. Not only does the AFS System improve seal and stability, an additional benefit comes in the form of a more efficient slide along the ice, ensuring goaltenders are getting the best energy transfer possible.
Sizes & Colours
The Warrior Alpha Surge Goalie Leg Pads are available in sizes 32+1.5, 33+1.5, 34+1.5, 35+1.5, and 36+1.5, and in White, White/Black, White/Red, White/Black/Red, White/Navy, White/Royal, and Black colourways. This pad can be customized for more spec and colour options.
| Features | Description |
|---|---|
| Boot Angle | 90° |
| Category | Elite/Pro Inspired |
| Customizable | Yes |
| External Material | JenPro |
| Heel & Toe Attachment | ARS System |
| Internal Construction | One-Piece Core | HyperComp |
| Knee & Calf Strapping | AVS System |
| Knee Cradle | Customizable |
| Knee & Thigh Protection | Soft Foam Padding |
| Made in | Vietnam |
| Pad Break | Single |
| Toe Taper | 87° |
| Warranty | 30 Days |
| Weight | 5.1lbs (SR, 34+1.5, Single Pad) |
Goalie Leg Pads Sizing
Deciding your Goalie Pads size is crucial for having total control while moving in the crease. Sizing your pads properly is the difference between getting that perfect seal on your butterfly, and feeling clunky or unprotected in the net. Below we have compiled some information to better assist you in deciding which size is right for you.
Floor-To-Knee Measurement
Your Floor-To-Knee measurement will give you a good indication as to what "Pad Size" you will need. This measurement can be matched up with the provided sizing chart above.
How to Measure your Floor-To-Knee
- 1. In your bare feet, place the soft measuring tape at the inside of the bottom of your foot.
2. Slightly bend your knee.
3. Run the soft measuring tape up your shin, to the middle of your knee.
4. Match your Floor-To-Knee measurement with the provided sizing chart
What to look for when trying on your new pads.
Once you have your new leg pads, you’ll need to make sure they fit you properly. To do so, you’ll need to put the pads on with your skates. There a couple things to do to check size, once you have the pads on:
1. Stand straight and bring your feet together. This will show you the overall height of the pad, while on. Your pads should not be taller than your hips. Ideally you want the top of your pad at the half-way point of your thighs. A pad fitted for a young growing goaltender can be a little taller, so a little above the half-way point is normal.
2. Next you want to get in your stance, keep your hands in a ready position, and drop to your butterfly. Without moving your legs to correct your butterfly, bring your heels together. This is where you assess your knee position. For a proper fit, you want the middle of your knee to sit directly on the center of the knee stack. If you’re looking for growing room, you want the middle of your knee to land roughly 1.5” below the center of the knee stack (1” for JR).
Not getting a complete seal while in your butterfly?
If you're having trouble getting a full seal in your new pads, it may be the way you’re strapping them up. Make sure your boot strap and top straps (above knee) are loosened up a bit. The reason you want these straps loose is because they have a direct effect on the rotation of the pad. Having a loose boot strap makes it easy for your foot and ankle to rotate as the pad moves. Same goes for the top straps, as you don't want them pulling down too hard on the thigh rise.
Kevin Woodley of InGoal Magazine with Cam from The Hockey Shop Goal Department. Published August 2026.
| Features | Description |
|---|---|
| Boot Angle | 90° |
| Category | Elite/Pro Inspired |
| Customizable | Yes |
| External Material | JenPro |
| Heel & Toe Attachment | ARS System |
| Internal Construction | One-Piece Core | HyperComp |
| Knee & Calf Strapping | AVS System |
| Knee Cradle | Customizable |
| Knee & Thigh Protection | Soft Foam Padding |
| Made in | Vietnam |
| Pad Break | Single |
| Toe Taper | 87° |
| Warranty | 30 Days |
| Weight | 5.1lbs (SR, 34+1.5, Single Pad) |
Goalie Leg Pads Sizing
Deciding your Goalie Pads size is crucial for having total control while moving in the crease. Sizing your pads properly is the difference between getting that perfect seal on your butterfly, and feeling clunky or unprotected in the net. Below we have compiled some information to better assist you in deciding which size is right for you.
Floor-To-Knee Measurement
Your Floor-To-Knee measurement will give you a good indication as to what "Pad Size" you will need. This measurement can be matched up with the provided sizing chart above.
How to Measure your Floor-To-Knee
- 1. In your bare feet, place the soft measuring tape at the inside of the bottom of your foot.
2. Slightly bend your knee.
3. Run the soft measuring tape up your shin, to the middle of your knee.
4. Match your Floor-To-Knee measurement with the provided sizing chart
What to look for when trying on your new pads.
Once you have your new leg pads, you’ll need to make sure they fit you properly. To do so, you’ll need to put the pads on with your skates. There a couple things to do to check size, once you have the pads on:
1. Stand straight and bring your feet together. This will show you the overall height of the pad, while on. Your pads should not be taller than your hips. Ideally you want the top of your pad at the half-way point of your thighs. A pad fitted for a young growing goaltender can be a little taller, so a little above the half-way point is normal.
2. Next you want to get in your stance, keep your hands in a ready position, and drop to your butterfly. Without moving your legs to correct your butterfly, bring your heels together. This is where you assess your knee position. For a proper fit, you want the middle of your knee to sit directly on the center of the knee stack. If you’re looking for growing room, you want the middle of your knee to land roughly 1.5” below the center of the knee stack (1” for JR).
Not getting a complete seal while in your butterfly?
If you're having trouble getting a full seal in your new pads, it may be the way you’re strapping them up. Make sure your boot strap and top straps (above knee) are loosened up a bit. The reason you want these straps loose is because they have a direct effect on the rotation of the pad. Having a loose boot strap makes it easy for your foot and ankle to rotate as the pad moves. Same goes for the top straps, as you don't want them pulling down too hard on the thigh rise.
