TRUE Catalyst 3X6 Intermediate Hockey Skates
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.Intro & New Features
New for 2026, the Catalyst 3X6 hockey skates offer lightweight agility without compromising on durability. It features a patented one-piece shell design, and is built to enhance on-ice performance and comfort through an anatomical fit. This skate is ideal for competitive players looking to experience TRUE’s best-in-class fit at an entry level price point.
Skate Fit Profile
The TRUE Catalyst 3X6 Intermediate Hockey Skates come in sizes 4-6.5 in both a regular and wide skate width. When deciding on a skate size, a good rule of thumb is to take your shoe size and drop it by 1 or 1.5 sizes.
Boot Construction & Stiffness Profile
The boot is made up of a Polyfusion one-piece construction. The one-piece shell stands apart from traditional skates and the rest of the market, offering a fully integrated design that delivers a superior fit right off the shelf. This construction ensures exceptional comfort and optimal energy transfer, giving players elite-level performance with every stride. This skate is designed for entry-level players, meaning that the boot is less stiff, providing an easier to break in experience.
Liner & Internal Padding
The inside of the skate uses a printed brushed tricot liner. This liner is a premium, moisture-wicking interior material primarily available on high-end TRUE skates. It combines a soft, comfortable feel with excellent sweat-repellency. The brushed texture acts as a highly effective wicking agent, drawing sweat away from the feet and keeping them dry. The brushed finish also provides a textured grip that locks your heel into place, preventing internal slippage during aggressive pushes.
Lacing System
The 3X6 skates use a traditional yet effective lacing system, featuring standard eyelets that allow you to fine-tune the fit and tension according to your preference. The straightforward lacing design provides a classic and reliable approach, ensuring that you can easily achieve a secure and customized fit to optimize your on-ice performance.
Tongue
With a lightweight laminated tongue and pressed T-guard, players can feel protected and secure when lacing these skates up. The tongue is designed to provide players with comfort while on the ice, and during every shift.
Tendon Guard
The tendon guards are on the back of the skate, protecting the tendons and lower part of the shins. They are co-molded to the skate and feature steel rivets to keep them attached.
Toe Cap
The toe cap on these skates feature the CARV toe cap. It is designed to provide better clearance when turning. This allows the players to get lower into their stride and get deeper edges when making turns or coming to stops.
Steel/Runner & Blade Holder
The SpeedShift holder and steel system is 15% lighter than its predecessor for faster strides and quicker turns. Its quick-change mechanism makes blade swaps easy, while a more neutral pitch gives you better balance on the ice The SpeedShift stainless steel is a high-grade handcrafted 3mm stainless steel with a high polish finish to ensure a fine, hard edge for better power, strength, and precision.
| Features | Description |
|---|---|
| Category | Competitive |
| Boot Construction | Polyfusion One-Piece Construction |
| Liner & Internal Padding | Printed Brushed Tricot |
| Tongue | Laminated Tongue |
| Tendon Guard | Moderate Flex |
| Toe Cap | Low Profile CARV Toe Cap |
| Steel/Runner | SpeedShift Stainless |
| Blade Holder | SpeedShift |
| Holder & Steel Warranty | 1 Year |
| Boot Warranty | 1 Year |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
| Features | Description |
|---|---|
| Category | Competitive |
| Boot Construction | Polyfusion One-Piece Construction |
| Liner & Internal Padding | Printed Brushed Tricot |
| Tongue | Laminated Tongue |
| Tendon Guard | Moderate Flex |
| Toe Cap | Low Profile CARV Toe Cap |
| Steel/Runner | SpeedShift Stainless |
| Blade Holder | SpeedShift |
| Holder & Steel Warranty | 1 Year |
| Boot Warranty | 1 Year |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
