TPS Response Rubber Intermediate Goalie Stick
blade points left
blade points right
At a Glance
- 18K composite shaft and paddle
- LS Pro Comfort Rubber handle for grip
- VTX paddle with high torsional stiffness
- XPND Performance Blade for a wide sweet spot
- Paddle 21 to 27 inches, left or right, P31 curve
Who Is This For
- Goalies who want a rubber handle instead of a grip coating
- Goalies who handle the puck and want a stiff paddle
- Junior through senior goalies sizing by paddle height
Composite goalie stick with a rubber handle, VTX paddle and XPND blade, in junior to senior
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.Intermediate build, for goalies between junior and senior.
The TPS Response Rubber is a composite goalie stick built around grip and feel. The handle is wrapped in LS Pro Comfort Rubber, and that is what you notice first. It gives the top hand something solid to hold without a tacky grip coating that wears off, and it stays manageable once a glove is wet.
The shaft and paddle are 18K composite, which keeps the weight down while leaving the paddle stiff enough to take a shot without folding into your hand. The VTX paddle is built for high torsional stiffness, so the blade does not twist away when a puck catches the toe. Down low, the XPND Performance Blade spreads the sweet spot across more of the face, which helps with the first touch on a rebound and with moving the puck up the wall.
Paddle, hand and curve
Paddle lengths run from 21 to 27 inches, in left and right, and the blade comes in the P31 pattern. Junior, intermediate and senior builds cover the range. Paddle height is the measurement that matters most on a goalie stick, so work from your stance rather than your height. The sizing tab walks through how to check it.
- Shaft and paddle: 18K composite
- Handle: LS Pro Comfort Rubber
- Paddle: VTX, high torsional stiffness
- Blade: XPND Performance Blade
- Blade pattern: P31
- Paddle lengths: 21 to 27 inches
- Hand: Left or right
- Builds: Junior, intermediate, senior
Goalie Stick Sizing Information
Unlike other pieces of gear, Goalie Sticks are sized mostly to the goaltender’s preference and playing style rather than their height. The most important measurement, when purchasing a new goal stick, is the paddle height (the wide portion of the stick), which is usually taken from the heel of the stick to the shaft/paddle interface. The reason for the paddle height’s significance is because it sets up the goaltender’s depth in the ready stance and (if properly sized) positions the blocker in an optimal position.
Sizing Your Goalie Stick
To start analyzing the size of your goalie stick, put on your goalie skates to get an accurate height of where you will be in your stance. If you’re looking to be even more accurate, strap on your goalie pads and blocker as well. Once that is done, get comfortable in your natural stance (the one you’d be in during a majority of gameplay) and look for the following:
1. The entire blade of the stick is flush with the ground while being 1’ - 2’ in front of your feet
2. After getting your stick into the flush position, check that the inside edge of the blocker hand sits on the outside edge of the goal pad (this is while holding just above the paddle).
Goalie Stick Sizing Considerations
Goalie Stick sizing can be very subjective compared to other pieces of equipment. The reason for this is the ambiguity of each goaltenders ‘natural stance’, especially with younger goaltenders. It is rather common for children to use taller sticks in comparison to their height, as their stance depth isn’t usually as aggressive as a seasoned goalie.
The shaft length of a goalie stick is usually best left at its stock length, as it serves to counteract the weight of the blade and ideally place the center of gravity at the top of the paddle. The one exception to this rule is for advanced puck handlers, cutting the shaft will allow more power transfer when shooting as a result of being able to keep the blade flush to the ice while near the goaltender’s feet.
Kevin Woodley of InGoal Magazine with Cam from The Hockey Shop Goal Department. Published October 2026.
- Shaft and paddle: 18K composite
- Handle: LS Pro Comfort Rubber
- Paddle: VTX, high torsional stiffness
- Blade: XPND Performance Blade
- Blade pattern: P31
- Paddle lengths: 21 to 27 inches
- Hand: Left or right
- Builds: Junior, intermediate, senior
Goalie Stick Sizing Information
Unlike other pieces of gear, Goalie Sticks are sized mostly to the goaltender’s preference and playing style rather than their height. The most important measurement, when purchasing a new goal stick, is the paddle height (the wide portion of the stick), which is usually taken from the heel of the stick to the shaft/paddle interface. The reason for the paddle height’s significance is because it sets up the goaltender’s depth in the ready stance and (if properly sized) positions the blocker in an optimal position.
Sizing Your Goalie Stick
To start analyzing the size of your goalie stick, put on your goalie skates to get an accurate height of where you will be in your stance. If you’re looking to be even more accurate, strap on your goalie pads and blocker as well. Once that is done, get comfortable in your natural stance (the one you’d be in during a majority of gameplay) and look for the following:
1. The entire blade of the stick is flush with the ground while being 1’ - 2’ in front of your feet
2. After getting your stick into the flush position, check that the inside edge of the blocker hand sits on the outside edge of the goal pad (this is while holding just above the paddle).
Goalie Stick Sizing Considerations
Goalie Stick sizing can be very subjective compared to other pieces of equipment. The reason for this is the ambiguity of each goaltenders ‘natural stance’, especially with younger goaltenders. It is rather common for children to use taller sticks in comparison to their height, as their stance depth isn’t usually as aggressive as a seasoned goalie.
The shaft length of a goalie stick is usually best left at its stock length, as it serves to counteract the weight of the blade and ideally place the center of gravity at the top of the paddle. The one exception to this rule is for advanced puck handlers, cutting the shaft will allow more power transfer when shooting as a result of being able to keep the blade flush to the ice while near the goaltender’s feet.