CCM Tacks XR Pro Senior Hockey Shin Guards
- Ships within Canada only
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.
Proudly Canadian
Serving players since 1988.Intro & New Features
The Tacks XR Pro protective line of gear is built for players who bring intensity to every shift, no matter the pressure, the speed, or the level. With impact absorbing construction, and an adjustable fit that moves with you, each piece is designed with high performance materials allowing full range of motion. The Tacks XR Pro protective gear delivers maximum coverage and comfort without the bulk, so you can focus on the game front the first shift to the final buzzer.
Construction
Designed with a Max Coverage FZN shield design, this new injection molded shin cap is fused with an inner plastic sling to provide improved protection on both sides and self conforming calf protection to make sure you’re ready to take on the worst of impacts.
Calf Protection
The calves are protected with a self conforming calf guard with injected plastic guard, allowing for players to have protection in all areas while on the ice. These shin guards also feature HD foam dampener with added D30 to provide pro-level protection that self adapts to the player’s anatomy.
Knee Cap & Protection
CCM used an injection kneecap design that features a D30 Zero comfort donut. This construction features an injected plastic cap, with a D30 Zero donut which is designed to better support the knee and distribute impact energy away from the joint. These shin guards also feature added thigh protection through a compress-molded EVA foam flexmotion thigh guard, providing pro-level protection that is removable and adjustable.
Shin Cap
The shins are protected with a new injection molded shin cap. This pro-strength shin cap features a landing to lock in tape coupled with a D30 foam reinforcement at the bottom for max protection against impacts. The extra durable liner prevents rubbing on the inside in the lower area of the pad.
Strapping System
To keep the padding and protection in place, CCM added a length-adjustable dual calf strap with a padded Hyper X lock strap. The length-adjustable dual calf straps are designed to wrap any calf size comfortably, while the Hyper X lock strap keeps the shin snug and in place all game long.
Liner
The inside of the shin guards feature a removable liner with D30 comfort. The bottom removable liner is added to allow players to customize their fit if they prefer to wear their skate tongues in for a closer to the leg snug protection.
Sizing
The CCM Tacks XR Pro Senior Hockey Shin Guards come in sizes 14”, 15”, 16”, and 17”.
| Features | Description |
|---|---|
| Category | Elite |
| Construction | Max Coverage FZN Shield Design |
| Calf Guard | Self Conforming Calf Guard Injected Plastic HD Foam Dampener w/ D30 |
| Knee Cap | Injection Kneecap | D30 Zero Comfort Donut |
| Shin Cap | New Injection Molded Shin Cap |
| Thigh Protection | Compress-Molded EVA Foam Flexmotion |
| Strapping | Length-Adjustable Dual Calf Strap Hyper X Lock Strap |
| Liner | Removable Liner w/ D30 Donut |
| Sizes | 14" - 17" |
| Warranty | 90 Days |
CCM Hockey Shin Guards Sizing Chart
Expand and Reset Image
Player Shin Guard Sizing Information
When sizing a shin pad, you must determine first if you will wear the shin pad over top of the skate tongue, or if the skate tongue will sit in front of shin pad and “flop” forward. This will determined the length of the shin pad you will want.
Your knee should fit directly into the center of the kneecap, which is usually lined and padded to help direct it and provide comfort. Once the pad is strapped to your leg, it should be secure and snug and should NOT be able to twist rotate or slide freely. There are many strapping systems offered and you must decide what you like and dislike. On some models you will find anchor straps or thicker straps which can offer a better more secure fit. Anchor straps are made up of a stretchy knit material and usually fasten above or below the calf muscle. These straps are designed to anchor the pad in place and not allow it slide up or down. Thicker straps across the calf wrap/guard are also often used, these straps help provide full protection to your leg ensuring that the calf guard reaches across your leg.
Keep in mind that as you go up in price you will usually see more adjustments, options and higher density foams and technologies used. You must determine within your budget, which shin pad offers the most features that you want, as well as provides the most comfort.
Sizing a Shin Pad over top of your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number up to the next whole number (i.e. 13.2” becomes 14”). Because the shin pad is sitting over top of the skate tongue, it enables your to wear a slightly bigger pad without compromising mobility. This is usually seen as an upside because you get extra protection in areas like the tongue of your skate.
If you are sizing a player and want to include growth room, we do recommend this method as well, because it allows for a bigger pad to be worn, again without compromising motion or mobility.
Sizing a Shin Pad underneath your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number down to the next whole number (i.e. 13.7” becomes 13”). Because the shin pad is shipping underneath the skate tongue, the pad will not be able to sit right against the edge of the skate and thus a slightly shorter shin pad is used. If a shin pad that is too big is tried on, you will notice that the shin pad is shifted up and the kneecap falls out of the designated spot. If this happens your shin and knee will not be properly protected and you are more susceptible to having your shin pad rotate or more as well.
Compare your height, weight and age to the charts provided to find your best fit. As well, use the measurement that was taken above to compare to the provided charts. Another good estimation is to look at your old/existing shin pads to see what size they are. If you are growing and have outgrown them, then next size up is probably for you. If you liked the way your shin pads felt, it may be smart to continue with the same size.
| Features | Description |
|---|---|
| Category | Elite |
| Construction | Max Coverage FZN Shield Design |
| Calf Guard | Self Conforming Calf Guard Injected Plastic HD Foam Dampener w/ D30 |
| Knee Cap | Injection Kneecap | D30 Zero Comfort Donut |
| Shin Cap | New Injection Molded Shin Cap |
| Thigh Protection | Compress-Molded EVA Foam Flexmotion |
| Strapping | Length-Adjustable Dual Calf Strap Hyper X Lock Strap |
| Liner | Removable Liner w/ D30 Donut |
| Sizes | 14" - 17" |
| Warranty | 90 Days |
CCM Hockey Shin Guards Sizing Chart
Expand and Reset Image
Player Shin Guard Sizing Information
When sizing a shin pad, you must determine first if you will wear the shin pad over top of the skate tongue, or if the skate tongue will sit in front of shin pad and “flop” forward. This will determined the length of the shin pad you will want.
Your knee should fit directly into the center of the kneecap, which is usually lined and padded to help direct it and provide comfort. Once the pad is strapped to your leg, it should be secure and snug and should NOT be able to twist rotate or slide freely. There are many strapping systems offered and you must decide what you like and dislike. On some models you will find anchor straps or thicker straps which can offer a better more secure fit. Anchor straps are made up of a stretchy knit material and usually fasten above or below the calf muscle. These straps are designed to anchor the pad in place and not allow it slide up or down. Thicker straps across the calf wrap/guard are also often used, these straps help provide full protection to your leg ensuring that the calf guard reaches across your leg.
Keep in mind that as you go up in price you will usually see more adjustments, options and higher density foams and technologies used. You must determine within your budget, which shin pad offers the most features that you want, as well as provides the most comfort.
Sizing a Shin Pad over top of your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number up to the next whole number (i.e. 13.2” becomes 14”). Because the shin pad is sitting over top of the skate tongue, it enables your to wear a slightly bigger pad without compromising mobility. This is usually seen as an upside because you get extra protection in areas like the tongue of your skate.
If you are sizing a player and want to include growth room, we do recommend this method as well, because it allows for a bigger pad to be worn, again without compromising motion or mobility.
Sizing a Shin Pad underneath your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number down to the next whole number (i.e. 13.7” becomes 13”). Because the shin pad is shipping underneath the skate tongue, the pad will not be able to sit right against the edge of the skate and thus a slightly shorter shin pad is used. If a shin pad that is too big is tried on, you will notice that the shin pad is shifted up and the kneecap falls out of the designated spot. If this happens your shin and knee will not be properly protected and you are more susceptible to having your shin pad rotate or more as well.
Compare your height, weight and age to the charts provided to find your best fit. As well, use the measurement that was taken above to compare to the provided charts. Another good estimation is to look at your old/existing shin pads to see what size they are. If you are growing and have outgrown them, then next size up is probably for you. If you liked the way your shin pads felt, it may be smart to continue with the same size.
