CCM Jetspeed FT6 Senior Hockey Shin Guards
- 10 left in stock
Free Shipping $100+
Fast Easy Returns
Best Price Promise
M.A.P. Policy Item
Ships Canada Only
Intro & New Features
CCM’s next shift in focus for 2023 is in the new Jetspeed FT6 line. The Jetspeed FT6 gear puts emphasis on breathability and mobility, which means much of the new tech found in the gear will be light, discreet, and designed to keep you cool. The FT6 shin guards feature an Aer-Tec Suspension and Thermoregulation System, a floating compress-molded EVA foam calf guard, and an anticollapse X-frame.
Shin Protection
The FT6 shin cap uses anatomical geometry to contour around your shin for a closer fit and optimized protection. The anticollapse X-frame is made of PE plastic and includes multiple ventilation ports for more breathability.
Knee Cap & Protection
The kneecaps are built with an anatomical JDP kneecap construction, which is a design meant to disperse force away from the point of impact, helping protect you from injury. The adjustable FloFoam knee comfort pad on the inside is built with a donut design to complement the kneecap, and it is also removable.
Calf Protection
The floating calf guard is made of compress-molded EVA foam, keeping the pads lightweight with the elite-level shot block protection you expect from high-end gear from CCM. The guards also have extra abrasion resistance at the bottom.
Liner
CCM debuts their new Aer-Tec Suspension and Thermoregulation technology, which includes a light nearly non-existent liner suspending the gear slightly away from the body for increased ventilation and to keep you feeling nice and cool while you play. The liner in the shin guards has been treated with Polygiene and Odor Crunch to keep them fresher for longer.
Strapping
The FT6 uses an upper lock strap with a comfort cushion, as well as a length-adjustable calf strap to keep the pads locked in place on your leg.
Sizes
The Jetspeed FT6 Senior shin guards come in 14”, 15”, and 16” sizes.
| Feature | Description |
|---|---|
| Calf Protection | Floating Calf Guard | EVA Foam |
| Category | Elite |
| Knee Cap | Anatomical JDP Design |
| Liner | Aer-Tec Suspension and Thermoregulation Systems | Odor Crunch | Polygiene |
| Made In | China |
| Removable Liner | FloFoam Kneecap Pad |
| Shin Protection | Anticollapse X-Frame | PE Plastic |
| Side Knee Protection | EVA Foam |
| Sizes | 14” - 16” |
| Strapping System | Upper Lock Strap | Length-Adjustable Calf Strap |
| Warranty | 90 Days |
| Weight | 640g (single 14" pad) |
CCM Hockey Shin Guards Sizing Chart
Player Shin Guard Sizing Information
When sizing a shin pad, you must determine first if you will wear the shin pad over top of the skate tongue, or if the skate tongue will sit in front of shin pad and “flop” forward. This will determined the length of the shin pad you will want.
Your knee should fit directly into the center of the kneecap, which is usually lined and padded to help direct it and provide comfort. Once the pad is strapped to your leg, it should be secure and snug and should NOT be able to twist rotate or slide freely. There are many strapping systems offered and you must decide what you like and dislike. On some models you will find anchor straps or thicker straps which can offer a better more secure fit. Anchor straps are made up of a stretchy knit material and usually fasten above or below the calf muscle. These straps are designed to anchor the pad in place and not allow it slide up or down. Thicker straps across the calf wrap/guard are also often used, these straps help provide full protection to your leg ensuring that the calf guard reaches across your leg.
Keep in mind that as you go up in price you will usually see more adjustments, options and higher density foams and technologies used. You must determine within your budget, which shin pad offers the most features that you want, as well as provides the most comfort.
Sizing a Shin Pad over top of your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number up to the next whole number (i.e. 13.2” becomes 14”). Because the shin pad is sitting over top of the skate tongue, it enables your to wear a slightly bigger pad without compromising mobility. This is usually seen as an upside because you get extra protection in areas like the tongue of your skate.
If you are sizing a player and want to include growth room, we do recommend this method as well, because it allows for a bigger pad to be worn, again without compromising motion or mobility.
Sizing a Shin Pad underneath your Skate Tongue:
To size a shin pad correctly when fitting over top of your skate tongue, measure the length (in inches) of your leg from the middle of your knee cap, when it is bent at a 90 degree angle, to the top of the boot of the skate. Once you have this measurement, round the number down to the next whole number (i.e. 13.7” becomes 13”). Because the shin pad is shipping underneath the skate tongue, the pad will not be able to sit right against the edge of the skate and thus a slightly shorter shin pad is used. If a shin pad that is too big is tried on, you will notice that the shin pad is shifted up and the kneecap falls out of the designated spot. If this happens your shin and knee will not be properly protected and you are more susceptible to having your shin pad rotate or more as well.
Compare your height, weight and age to the charts provided to find your best fit. As well, use the measurement that was taken above to compare to the provided charts. Another good estimation is to look at your old/existing shin pads to see what size they are. If you are growing and have outgrown them, then next size up is probably for you. If you liked the way your shin pads felt, it may be smart to continue with the same size.
