Bauer Vapor Hyperlite Junior Hockey Shoulder Pads
- 3 left in stock
Free Shipping $100+
Fast Easy Returns
Best Price Promise
Ships Canada Only
Bauer continues to add more to the Hyperlite line with the Vapor Hyperlite shoulder pads. The design goes above and beyond that of the 2X series while bringing back some of their most reliable tech, including Aerolite shoulder caps and Hyperlite HD foam. The pads also improve in other key areas, particularly with the Thermocore Zero liner, one-piece EXO-Lite skin on the sleeve, and Hyperlite HD foam on the sternum. These pads also come equipped with a Flexaprene vest and enhanced spine and rib protection.
Shoulder Caps & Protection
The shoulder caps are made of Aerolite 2.0 and connected to the pads with Connektor to hold them in place. Aerolite is found in protectives across Bauer equipment and other sports and is known for its light weight and strong ability to absorb and disperse the impact from big hits.
Sternum Protection
The highest-end Vapor shoulder pads have evolved from using an X-Lite Shield sternum to a floating Hyperlite HD sternum with a Shocklite foam insert. In addition, the Flexaprene foam over the chest allows for optimal flexibility when in motion while giving the other foams a good, solid base. Shocklite can also be found in the Vapor Hyperlite helmet; this comfortable VTX foam is both lightweight and protective, complementing the Vapor line well. Hyperlite has been reused and added to the sternum’s construction because of its pliability and mobility, in addition to its great protective properties. Combined with the EXOLite skin over the sternum, you can rest assured you’ll be covered all game where it matters.
| Feature | Description |
|---|---|
| Bicep Protection | EXO-Lite Skin |
| Category | Elite/Pro Inspired |
| Liner | Thermocore Zero |
| Removable Abdominal Protection | Yes |
| Shoulder Caps | Lightweight Aerolite 2.0 w/Connektor |
| Sizes | S, M |
| Spine Protection | Hyperlite HD Molded Foam w/Shocklite Foam Insert |
| Sternum Protection | Floating Hyperlite HD Foam w/Shocklite Foam Insert |
| Warranty | 90 Days |
Hockey Shoulder Pads Sizing Information
Sizing before Purchase
To fit for a properly sized shoulder pad, you will need a soft tape measurer to measure and record your chest measurement. To do this, find the widest point of your chest (usually just below your armpits) and measure the circumference. Record the measurement in inches and compare to the available sizing charts in each brand. Also compare your height, weight and age to find your best fit.
Sizing after Purchase
Once you have received your new shoulder pad, stand in front of a mirror and strap them on. You will want to check the follow criteria to ensure a proper and protective fit.
1. The tips of your shoulder are sitting directly under the middle of the shoulder cap. If you are checking sizing for a child, it is ok for the tips of their shoulder to be under the inner half of the cap.
- This is important because if the shoulder cap does not sit in the correct position, your clavicles, shoulders, and upper arms can become more susceptible to injury.
- Adjust the bicep guards using the Velcro straps located underneath the shoulder caps (if applicable). At the highest point, the bicep guards should not be more than halfway down the upper arm. This is important because they can interfere with your elbow pads, throwing off the fit.
If you are checking sizing for a child, it is ok for the tips of their shoulder to be under the inner half of the cap and not directly in line with the middle.
