Bauer Supreme Matrix Junior Hockey Skates (2024)
- Ships within Canada only
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.
Proudly Canadian
Serving players since 1988.Intro & New Features
Those who have been fans of Source for Sports exclusive gear are in for a treat with Bauer’s new Supreme Matrix skates for 2024. Featuring a Reflex tendon, Aerofoam+ technology, a Carbon CURV composite quarter package, and the same boldness of the highest-end Shadow skates, you can now empower your stride to the highest level at a more budget-friendly price.
Skate Fit Profile
The Matrix Junior skates come in sizes 1-3.5 and D and EE widths. D is a good size for regular-sized feet; wider feet may fit better in EE skates. The skates are also thermoformable, so you can bake the skates to fit closer to size.
Boot Construction & Stiffness Profile
The Digi Comp boot keeps the skates’ performance competitive without making it too stiff and difficult to skate in. For further reinforcement and stiffness at the bottom of the boot, the Matrix skate also has a Digi Comp outsole. As part of Bauer’s Supreme line, these skates have a high stiffness profile to withstand and cater to more powerful strides.
Liner & Internal Padding
For the Matrix, Bauer used a 1-pc hydrophobic liner in addition to a wear patch over the ankles to wick away moisture and repel odour while you play. Including this kind of liner ensures that you stay comfortable in your skates all game long without the potential distraction of a wet boot. The skates use Aerofoam Technology in the ankle padding, which is designed a bit thicker than conventional foam but is more form-fitting and thermoformable.
Toe Cap
For a better overall fit and to negate any unused space within the boot, Bauer turned to using an asymmetrical toe cap, a concept that has been observed in previous high-end Bauer skates. This isn’t necessarily new technology, but Bauer went ahead with the Supreme Matrix skates and enhanced the toe further for an even better fit.
Tendon Guard
Bauer’s original Flex tendon guard has been refined in the new Reflex tendon for 2024. This tendon does not use inserts, and its aggressive shape and flex notches add spring to your stride while keeping it tough enough to recoil back quickly, ready to strike again.This feature was originally only available in the Senior Ultrasonic and 3S Pro variations, but now in 2024, the Reflex guard is also a feature of the Matrix skate.
Tongue
The tongue is made of an updated 40oz pro stock felt material with an injected metatarsal guard. This combination of comfort and protection is designed to form fit around and over the metatarsus area for extra coverage, and the thick felt coupled with the tough exterior help shield the front ankle area of your foot from harm while you play.
Insoles
The skates use a Form Fit+ footbed complete with memory foam for premium comfort on the landing.
Lacing System
The Matrix uses a standard flex facing lace system along the eyelets with improved durability and reliability in the materials used.
Steel Runner, Holder & Blade Profile
To hold the blade in place, the Supreme Matrix skate employs a TUUK Lightspeed Edge holder, which is the same as it was in the previous highest-end Supreme Ultrasonic skates. For steel, the Matrix uses a Pulse Stainless Steel blade, which is highly durable with a solid glide.
Graphics
Now onto the most exciting part: the new Matrix graphics. The Supreme Matrix boot looks very similar to the highest-end Shadow in terms of the slick, black and silver colouration and silver/gold accents and logos. The accents depict cybernetic patterns along the sides in addition to Bauer’s new graphic logo on the heel.
| Feature | Description |
|---|---|
| Category | Performance |
| Sizes | 1-3.5 Full & Half | D/EE |
| Quarter Package | Digi Comp | Comfort Edge Padding |
| Liner | 1-Piece Hydrophobic Liner | Wear Patch |
| Internal Padding | Aerofoam |
| Tongue | 40oz Pro Stock Felt |
| Insoles | Hydrophobic Liner |
| Outsole | Digi Comp |
| Heat Moldable | Yes |
| Thermoformable | Yes |
| Holder | TUUK Lightspeed Edge |
| Steel | Pulse SS |
| Holder Warranty | 365 Days |
| Boot & Steel Warranty | 90 Days |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
| Feature | Description |
|---|---|
| Category | Performance |
| Sizes | 1-3.5 Full & Half | D/EE |
| Quarter Package | Digi Comp | Comfort Edge Padding |
| Liner | 1-Piece Hydrophobic Liner | Wear Patch |
| Internal Padding | Aerofoam |
| Tongue | 40oz Pro Stock Felt |
| Insoles | Hydrophobic Liner |
| Outsole | Digi Comp |
| Heat Moldable | Yes |
| Thermoformable | Yes |
| Holder | TUUK Lightspeed Edge |
| Steel | Pulse SS |
| Holder Warranty | 365 Days |
| Boot & Steel Warranty | 90 Days |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
