Bauer Supreme M40 Junior Hockey Skates
- Ships within Canada only
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.
Proudly Canadian
Serving players since 1988.Intro & New Features
For 2024, Bauer introduces the new M40 hockey skate: a mid-line variation in their transition from the Supreme S-series to the M-series of skates. This skate includes many performance-enhancing technologies for a variety of players at a more affordable price point. Tech of note includes the Digi Comp quarter package, MotionFlexMAX technology, the Aerofoam ankle padding, and the Form Fit+ footbed.
Skate Fit Profile
The M40 Junior skate comes in sizes 1-3.5 Full and Half sizes and D and EE widths. D size is more of a standard width, whereas EE fits a bit wider for larger feet. When deciding on a skate size, a good rule of thumb is to take the player’s shoe size and drop it by 1 or 1.5 sizes. Although the Junior size skate is a bit more flexible, Supreme family skates are classified as stiffer than Vapor family skates.
Boot Construction & Stiffness Profile
The Digi Comp boot keeps the skates’ performance competitive without making it too stiff and difficult to skate in.Exclusive to the Junior and Youth-sized variations of the M4, MotionFlexMAX facing indicates specific zones in between the second, third, and fourth eyelets with increased forward flex for a more enhanced range of motion. Instead of having to sacrifice the use of the top eyelet, MotionFlexMAX offers the same effect while allowing you to tie the skates all the way to the top for better support. This tech is an improved version of the previous generation MotionFlex.
Liner/Internal Padding
For the M40, Bauer used a sublimated hydrophobic microfibre liner along the inside to wick away moisture and repel odour while you play. Including this kind of liner ensures that you stay comfortable in your skates all game long without the potential distraction of a wet boot. There is also Aerofoam Technology in the ankle padding, a returning high-end tech designed a bit thicker than conventional foam but is more form-fitting and thermoformable.
Toe Cap
The M40 skate uses a standard toe cap to keep the construction simple and to accommodate a wider variety of foot shapes and sizes.
Tongue
The tongue is made of an updated 48oz pro stock felt material with an injected metatarsal guard. This combination of comfort and protection is designed to form fit around and over the metatarsus area for extra coverage, and the thick felt coupled with the tough exterior help shield the front ankle area of your foot from harm while you play.
Insoles
The skates use a Form Fit+ footbed complete with memory foam for premium comfort on the landing.
Steel Runner, Holder & Blade Profile
The Bauer Supreme M40 Junior Hockey Skates use the TUUK Lightspeed Edge holder paired with the LS Balance blade with a 13 foot radius, this helps making gliding and balancing on the ice much easier.
Sizes
The Bauer Supreme M40 Junior Hockey Skates come in sizes 1-3.5 (full & half). These skates are available in D & EE widths.
| Features | Description |
|---|---|
| Level | Performance |
| Key Features | Motion Flex Max |
| Quarter Package | Digi Comp |
| Facing / Flex | Motion Flex Max |
| Lining Material | Sublimated Hydrophobic Microfiber |
| Ankle Padding | Aerofoam |
| Tongue | Junior Pro Stock 48oz Felt |
| Footbed | Form Fit Comfort Foam |
| Thermoformable | Yes |
| Outsole | Digi Comp |
| Blade Holder | TUUK Lightspeed Edge |
| Runner | LS Balance |
| Toe Cap | Standard |
| Sizing | 1 - 3.5 (full & half) D & EE Widths |
| Boot / Steel Warranty | 90 Days |
| Holder Warranty | 1 Year |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
| Features | Description |
|---|---|
| Level | Performance |
| Key Features | Motion Flex Max |
| Quarter Package | Digi Comp |
| Facing / Flex | Motion Flex Max |
| Lining Material | Sublimated Hydrophobic Microfiber |
| Ankle Padding | Aerofoam |
| Tongue | Junior Pro Stock 48oz Felt |
| Footbed | Form Fit Comfort Foam |
| Thermoformable | Yes |
| Outsole | Digi Comp |
| Blade Holder | TUUK Lightspeed Edge |
| Runner | LS Balance |
| Toe Cap | Standard |
| Sizing | 1 - 3.5 (full & half) D & EE Widths |
| Boot / Steel Warranty | 90 Days |
| Holder Warranty | 1 Year |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
