Bauer Supreme F50 Pro Senior Hockey Skates
- 1 in stock
Product Notes
- This product can only be shipped within Canada
Free Shipping
Orders over $119
90-Day Returns
Easy and hassle free.
Price Match
Best price guaranteed.
Proudly Canadian
Serving players since 1988.Intro & New Features
New to the Supreme line in 2026 is the Bauer Supreme F50 Pro Hockey Skates. The F50 Pro rolls out many new and effective technologies to get you to the next level, including AMP Flex Facing Technology, a composite outsole, Aerofoam+ ankle padding, and a 48oz flex tongue. These features make the skate a great option for all hockey who look for comfort and performance in a skate.
Skate Fit Profile
The Supreme F50 Pro skates come in Bauer’s fits 1, 2, and 3, which is a concept that debuted in 2020. This was a great innovation, considering how the three lines, Vapor, Supreme, and Nexus, which all historically had their own fits, despite performing differently. Now, those with narrower feet for example can enjoy the powerful stride enhancements that come with the Supreme line. Below is how the Bauer Fit System compares to previous years’ Bauer Skates:
- Fit 1 = Low Volume, Narrow Width (closest aligned to the Vapor fit Profile)
- Fit 2 = Medium Volume, Medium Width (closest aligned to the Supreme fit Profile)
- Fit 3 = High Volume, Wide Width (closest aligned to the Nexus fit profile)
Boot Construction & Stiffness Profile
A key component of the Supreme line is the load and transfer systems, and the F50 Pro’s build is designed to increase the player’s ability to get the most out of their stride. Bauer integrated 3D Lasted Carbon CURV Composite in the construction, which makes the skate both lightweight and thermoformable. The Thermoformable Anaform Upper adds to the moldable properties of the boot. The composite outsole used on this skate further reinforces the skates durability.
Liner & Internal Padding
The skates are outfitted with a Lock-Fit Pro liner for extra grip, durability, and moisture management, so you can be comfortable and perform at your best. The skates use Aerofoam+ Technology in the ankle padding, which is designed a bit thicker than conventional foam but is more form-fitting and thermoformable.
Toe Cap
For a better overall fit and to negate any unused space within the boot, Bauer turned to using an asymmetrical toe cap, a concept that has been observed in previous high-end Bauer skates. This isn’t necessarily new technology, but Bauer went ahead with the Supreme F50 Pro skates and enhanced the toe further for an even better fit.
Tendon Guard
The Supreme F50 Pro skates feature the Reflex tendon guard. Inspired by the previous Flex tendon guard, this one has been redefined to provide better performance. This tendon guard does not use inserts, and its aggressive shape and flex notches add spring to your stride while keeping it tough enough to recoil back quickly, ready to strike again.
Tongue
A 48oz pro stock felt tongue comes stock with the new Supreme F50 Pro skates, which provides exceptional protection against lace bite and impact to ensure maximum comfort and support during intense gameplay. Its pro stock design ensures a professional-level fit, feel, and responsiveness, giving you the confidence to push your limits on the ice.
Insoles
The Supreme F50 Pro skates use a Lock-Fit footbed, completing the lining inside the skates. Lock-Fit is designed to, as the name suggests, lock your foot in place and make it easier for you to push off and keep control of your skating.
Lacing System
As used in previous years of Supreme skates, the F50 Pro’s continue to use Standard eyelets. This integration allows the skates to have increased durability that can withstand intense, long-term use. Standard eyelets also allow the player to easily modify their lacing to allow for greater forward flex, while having a tight, secure fit that prevents the foot from shifting within the boot, which is essential for proper energy transfer, stability, and quick turns.
These skates also incorporate the use of AMP Flex Facing. This design is an area between the second and third eyelets with increased forward flex for a better range of motion. This innovation was introduced to help skaters tie their skates to the top eyelet while retaining optimal flex in their ankles.
Steel/Runner, Holder & Blade Profile
The Bauer Supreme F50 Pro Hockey Skates will come with the Fly-X steel, a runner with a high grade core and enhanced edge retention. The holder featured in the skate is the Bauer Powerfly holder.
Sizing
The Bauer Supreme F50 Pro Senior Hockey Skates come in sizes 7-12 (full & half) in Fit 1, Fit 2, and Fit 3.
| Features | Description |
|---|---|
| Category | Elite |
| Sizes | 7-12 (full & Hlaf) |
| Quarter Package | 3D Lasted Carbon CURV |
| Facing/Flex | AMP Flex Facing |
| Lining Material | Lock-Fit Pro |
| Ankle Padding | Aerofoam+ |
| Tongue | Lock-Fit |
| Toe Cap | Asymmetrical |
| Thermoformable | Anaform Upper |
| Outsole | Composite |
| Holder | Powerfly |
| Steel/Runner | Fly-X |
| Holder Warranty | 365 Days |
| Boot & Steel Warranty | 90 Days |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
| Features | Description |
|---|---|
| Category | Elite |
| Sizes | 7-12 (full & Hlaf) |
| Quarter Package | 3D Lasted Carbon CURV |
| Facing/Flex | AMP Flex Facing |
| Lining Material | Lock-Fit Pro |
| Ankle Padding | Aerofoam+ |
| Tongue | Lock-Fit |
| Toe Cap | Asymmetrical |
| Thermoformable | Anaform Upper |
| Outsole | Composite |
| Holder | Powerfly |
| Steel/Runner | Fly-X |
| Holder Warranty | 365 Days |
| Boot & Steel Warranty | 90 Days |
Hockey Player Skate Sizing Guide
When sizing for the correct size of a skate, we always advise taking the measurements below from a sitting position and not standing upright. Additional weight on your foot/feet can skew your result and misrepresent your foot size. The reason for this is that as you put your full weight on your feet, the arch of your foot will collapse and cause your foot to appear wider or longer than it actually is.
As well, please be aware that skate sizes and shoes sizing do not match exactly. As a general guideline, skates size 1 ½ sizes smaller than shoes.
It is ideal for a player to have a tight, snug fit both in length and width as this will provide the best performance and durability. If a skate is too big you will feel your feet slide around and you will not get the full performance out of the skates and can also develop calcium deposits - Haglund’s Deformity or “Bauer Bumps” for lack of a better term although this issue doesn’t only occur with Bauer models.
An Ideal Fit: Stand with your skates laced and your heel snug in the heel cup. Your toes should just barely feather the end of the toe box. Bend forward into a skating stance. Your toes should pull back slightly from the toe box. Once heat fit, your foot should slide back into the foams of the skate and the length you felt in your skating stance will more-or-less become you standing size.
To obtain the measurement above you will need a soft tape measure and a pen. Start by placing the tape measure flat along the ground in a straight line. Sitting in a chair, place your foot down with the longest point of your foot (usually big toe, or second toe) in line with the edge of the tape measure. Make sure you keep your weight off of your foot. Take a pen and mark the tape measure where the edge of your heel ends. Record this length in cm. This measurement will correspond with the sizing charts in each brand below, if you do not see your exact measurement, select the size with the next size increment above your measurement (i.e. you measure 24.9 cm, you would select 25.1 cm or Size 6).
Sizing Children for Growth Room: If you are purchasing skates for your child, it is common and usually recommended to add some additional room in the skate to increase the last, we recommend no more than 1 full size. Feet stop growing around ages 15 – 15 ½, and from ages 14 - 15 ½ we would recommend adding only half (1/2) a size in length. Follow the same measurement instructions as above, once you obtain your true size move up ½ or 1 size.
***Sizing of skates is very preference based and these measurements will not guarantee a fit that is right for you. Please use these as general guidelines, for the most accurate fit we always recommend getting measured by a professional skate fitter at our store or your local pro shop.***
