Brian's AirLite Intermediate Goalie Leg Pads
Free Shipping $100+
Fast Easy Returns
Best Price Promise
Vintage is in, and nothing shows this better than the Brian's Airlite Int line. Based on the Brian's Heratige pro leg pad and sporting a throwback graphic to the Air Pac pads of old, the Brian's Airlite Intermediate pads look like 1998 but play like 2018.
The Airlite Int features a construction that is slightly softer than the Subzero 7.0 that is also available from Brian's. Especially in the boot. This softness, paired with the knee rolls that will deaden puck impacts and give the pad a little bit of an old school feel. On the opposite side of the coin, the Airlite still features Brian's beloved smart strap system, and benefits from the massive weight savings that it provides. Also by removing all of the leather straps on the pad, the Airlite is very quick and easy to get on and off as well.
| 21" | 12" | 6.5" |
|---|---|---|
| 23" | 13.5" | 7" |
| 25" | 14.5" | 7.5" |
| 27+1" | 15.5" | 9" |
| 29+1" | 16" | 10" |
| 30+1" | 16" | 10.5" |
| 31+1" | 16.5" | 10.5" |
| 32+1" | 17" | 11" |
| 33+1" | 17.5" | 11" |
| 34+1" | 18" | 11" |
| 35+1" | 18" | 12" |
| 36+1" | 19" | 12" |
| 37+1" | 19" | 13" |
| 38+1" | 20" | 13" |
Goalie Leg Pads Sizing
Deciding your Goalie Pads size is crucial for having total control while moving in the crease. Sizing your pads properly is the difference between getting that perfect seal on your butterfly, and feeling clunky or unprotected in the net. Below we have compiled some information to better assist you in deciding which size is right for you.
Ankle-To-Knee Measurement
Your Ankle-To-Knee measurement will give you a good indication as to what "Pad Size" you will need. This measurement can be matched up with the provided sizing chart above.
How to Measure your Ankle-To-Knee
- 1. In your bare feet, place the soft measuring tape at the inside of the inside of your ankle.
2. Slightly bend your knee.
3. Run the soft measuring tape up your shin, to the middle of your knee.
4. Match your Ankle-To-Knee measurement with the provided sizing chart
What to look for when trying on your new pads.
Once you have your new leg pads, you’ll need to make sure they fit you properly. To do so, you’ll need to put the pads on with your skates. There a couple things to do to check size, once you have the pads on:
1. Stand straight and bring your feet together. This will show you the overall height of the pad, while on. Your pads should not be taller than your hips. Ideally you want the top of your pad at the half-way point of your thighs. A pad fitted for a young growing goaltender can be a little taller, so a little above the half-way point is normal.
2. Next you want to get in your stance, keep your hands in a ready position, and drop to your butterfly. Without moving your legs to correct your butterfly, bring your heels together. This is where you assess your knee position. For a proper fit, you want the middle of your knee to sit directly on the center of the knee stack. If you’re looking for growing room, you want the middle of your knee to land roughly 1.5” below the center of the knee stack (1” for JR).
Not getting a complete seal while in your butterfly?
If you're having trouble getting a full seal in your new pads, it may be the way you’re strapping them up. Make sure your boot strap and top straps (above knee) are loosened up a bit. The reason you want these straps loose is because they have a direct effect on the rotation of the pad. Having a loose boot strap makes it easy for your foot and ankle to rotate as the pad moves. Same goes for the top straps, as you don't want them pulling down too hard on the thigh rise.
