Warrior Ritual Custom Pro Senior Leg Pads
The Warrior Ritual Custom PRO is the result of the efforts of one of the industry’s most innovative designers, Pete Smith. His resume includes flat-faced pads, the knee block, the sliding toe bridge as well as the bindingless thighrise. The domestically produced Ritual Custom PRO includes unique features seen nowhere else, such as a bindingless boot for enhanced durability and reduced interference during skating. Another new design on the outside of the calf effectively seals against the post when tracking a puck below the goal line. Not to be forgotten, the Ritual has also been optimized to rotate freely on the leg for a proper seal by elevating the pad on the leg with a “tabletop” boot.
CLICK HERE to view "In Goal Magazines" article on the Warrior Ritual Pads!
|Weight||5.40 lbs. (34"+1.5")|
|Internal Construction||HD/LD Foam|
|Number of Straps||5|
|Strap Material||Top 2 Nylon, Bottom 3 Leather|
|Adjustable Straps||Top 2 Adjustable/Removable|
|Thigh Protection||Laced-in Thigh|
|Toe Attachment||Sliding Bridge|
You may also be interested in the following product(s)
As low as: $2,150.00
Goal Leg Pad Sizing
When the pad is on the leg with your skates on, your knee should fit perfectly into the middle of the knee cradle while your knee is slightly bent.
To allow some growing room you can get the knee to touch the bottom third of the knee cradle with the knee slightly bent. When sizing a set of leg pads for someone who is growing you want to give the most growing room possible, but you don't want the pad to be cumbersome and restrictive.
An easy way to properly estimate a goaltender's size for a pair of goal pads is to take the following measurements:
1) Floor to mid-point of knee cap - _________" (A)
2) Mid-point of kneecap to desired height on thigh - _________" (B)
3) Give us a call or email with the (A) + (B) measurements and we will fine tune the size that is right for you. We also need goaltenders height to compare to the measurements, as it is very common for people to add to the "real" measurements and this can completely distort the required size.